Category: Circuit Playground

Circuit Playground Arduino and Python Support

This page will show you how to program your Circuit Playground using Arduino or Python Firmata Firmware, as well as explain how to go back to to the Embedit Scratch firmware that comes pre-installed if you bought the Circuit Playground Inventor’s Kit. Support for Arduino and Python on the Circuit Playground is maintained by Adafruit, what I […]

Published on: 15 December 2016
Posted by: Robert Barron
Discussion: 3 Comments

Circuit Playground Scratch Blocks

This page will teach you about all the Scratch Blocks available for the Circuit Playground board. If you haven’t already, you’ll want to look at our getting started guide to get set up. You can find the Circuit Playground blocks under the More Blocks tab. Most of the following examples use a sprite, which is a […]

Published on: 10 November 2016
Posted by: Robert Barron
Discussion: 1 Comment

Circuit Playground Getting Started

This page will tell you everything you need to know to get started with the Embedit Circuit Playground Inventor’s Kit. The Inventor’s Kit will walk you through several activities that teach you Physical Computing with Scratch! You’ll be lighting up RGB LEDs, getting light, sound, and touch sensor readings, and a whole lot more in no […]

Published on: 8 November 2016
Posted by: Robert Barron
Discussion: 22 Comments